Welcome, great EduPodian. Are you searching for Basic Technology Lesson Note for third term JSS2 or Scheme of Work for JSS2 Third Term Basic Technology Lesson Note? If yes, then Search no more! You are in the right place.
BASIC TECHNOLOGY LESSON NOTE FOR THIRD TERM JSS2
This Lesson Note on Basic Technology for JSS2 third term covers weekly prepared lesson notes and each of them is rich in classwork, curriculum compliant, and syllabus based.
The lesson note is well-detailed with adequate evaluation to ensure that the learning objectives are achieved.
The scheme of work used in preparing the lesson note is based on the latest unified NERDC/UBE curriculum which is suitable for all schools in all the States in Nigeria.
Keep reading, you will find the Link to Download the complete lesson note in Ms-Word (Microsoft Word) Editable format below.
Basic Technology Scheme of Work for JSS2 Third Term
WEEK 1: Revision of Last Term’s work
WEEK 2: Belt and Chain drives
WEEK 3: Belt and Chain drives (Contd.)
WEEK 4: Gears
WEEK 5: Gears (Contd.)
WEEK 6: Hydraulics and Pneumatic Machines
WEEK 7: Building Construction I: Site Preparation
WEEK 8: Building Construction II: Setting Out
WEEK 9: Building Services: Taps and Water supply
WEEK 10: Practical Projects
WEEK 11: Revision
WEEK 12: Examination
WEEK 13: Examination
REFERENCE BOOKS:
- MELROSE, Basic Science and Technology Book 2
- NERDC, Basic Technology for JSS, Book 2
===================
NOTE: We have Secondary School Lesson Notes for ALL SUBJECTS, JSS1 – SS3 (first, second and third term). To see the Available Subjects, place your order and Download any of the Lesson Notes, CLICK HERE.
===================
BASIC TECHNOLOGY LESSON NOTE FOR THIRD TERM JSS2
Below are the Excerpts (Samples) of the 2022 Complete Basic Technology Lesson Notes for JSS2 Third Term
WEEK 1: Revision of Last Term’s Work
- A plane figure bounded by four equal sides is called ___ (a) square (b) rectangle (c) trapezium(d) kite
- Opposite sides of a parallelogram are ___ (a) diagonal (b) parallel (c) vertex (d) straight
- ___ is a plane figure enclosed by three straight lines(a) Triangle (b) Quadrilateral (c) Pentagon (d) Heptagon
- An octagon is a polygon with ___ sides ___ (a) 5 (b) 6 (c) 7(d) 8
- The sum of angles in a quadrilateral is ___(a) 90 (b) 180 (b) 270 (d) 360
- What is the center rule formula used to… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
===================
If you want the complete JSS2 Basic Technology Lesson Note for 1st, 2nd & 3rd term, CLICK HERE to order and Download the notes now!
===================
WEEK 2: BELT AND CHAIN DRIVES
Overview:
CONTENT
- Definition
- Types
- Uses
BELT DRIVES
A belt is a looped strip of flexible material used to mechanically link two or more rotating shafts. A belt drive offers smooth transmission of power between shafts at a considerable distance… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
WEEK 3: BELT AND CHAIN DRIVES (CONTD.)
Overview:
CONTENT
- Advantages and Disadvantages of Belt and Chain drives
- Uses of Belt and Chain Drives
ADVANTAGES OF BELT DRIVES
- Belt drives are simple and economical
- They don’t need parallel shafts
- Noise and… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
WEEK 4: GEARS
Overview:
CONTENT
- Definition
- Types
- Lubrication of gears
- Uses
GEARS
A gear is a wheel with teeth around its rim that mesh with the teeth of another wheel to transmit motion.
OPERATION
When two gears mesh, one is the driver and the other becomes… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
===================
NOTE: We also have Primary School Lesson Notes, Primary 1 – Primary 6 (first, second and third term). To see the Available Subjects and our pricing, CLICK HERE.
===================
Basic Technology Lesson Note for JSS2 (Third Term)
WEEK 5: GEARS (CONTD.)
Overview:
CONTENT
- Gear Ratio
- Gear Speed
GEAR RATIO
Gear ratio is defined as the ratio of number of teeth of output to input gear or input speed relative to output speed. It is calculated by… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
WEEK 6: HYDRAULICS AND PNEUMATIC MACHINES
Overview:
CONTENT
- Definition
- Types
- Uses
DEFINITION – HYDRAULICS AND PNEUMATICS
Hydraulics is the branch of science and technology concerned with the conveyance of liquids through pipes and channels, especially as a source of mechanical force or control. When compressed air (gas) is the liquid, it is called… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
WEEK 7: BUILDING CONSTRUCTION: SITE PREPARATION I
Overview:
Site preparation involves the removal of trees, demolishing buildings, removing any and all old underground infrastructures, and any other things that might affect the construction process in the future or hinder the project to be done.
In various building projects… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
WEEK 8: SETTING OUT
Overview:
Anybody wishing to construct a building usually first consult an architect on the need for a building and the type of building wanted. An architectural design is sent to… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
Basic Technology Lesson Note for JSS2 (Third Term)
WEEK 9: TAPS AND WATER SUPPLY
Overview:
CONTENT
- Definition of Tap
- Types of Taps
- Water Supply/ Plumbing/Fitting
Definition of Tap
A tap is a valve controlling the release of a liquid or gas. Taps are made using a wide range of materials, including stainless steel, chrome, brass, nickel and gold… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
WEEK 10: Practical Projects
Overview:
Choose one of the following project areas:
- Wood work
- Metal work
- Building construction
- Ele… To Download the Full Lesson Note Online, CLICK HERE. You can also reach us on WhatsApp, Click Here to Chat with us.
WEEK 11: Revision
WEEK 12: Examination
WEEK 13: Examination
===================
If you want the complete JSS2 Basic Technology Lesson Note for 1st, 2nd & 3rd term, CLICK HERE to order and Download the notes now!
===================
Why should you purchase Basic Technology Lesson Note for third term JSS2?
The content of the lesson note is well-structured with adequate evaluation.
The lesson note will help the teacher know the topics to teach and how to teach them to achieve learning objectives.
It will instill confidence in the teacher when delivering the lesson note in the classroom and inspire respect from the students.
It will help you to avoid over-reliance on textbooks giving you more time to focus and teach.
For the students, it will serve as a study guide helping them to stay ahead of the class.
For Parents who wish to home-school their children, this is a helpful compendium.
NOTE: The complete 3rd term Basic Technology Lesson Note for JSS2 is available, CLICK HERE to Download It.
Comments